URL: https://github.com/missionpinball/mpf-docs/blob/main/docs/hardware/opp/cobrapin/index.md
(rendered: https://missionpinball.org/latest/hardware/opp/cobrapin/)
Fetched: 2026-10-31. A full copy is already archived in docs/references/raw/cobrapin-official-doc/content.md.
Key passages (verbatim):
- "There are two neopixel chains that support 256 RGB pixels each for a total of 512."
- "RGBW pixels are also possible, but the number may be limited to 230 pixels per chain for a total of 460."
- J10: "Power input for Neopixels, most likely 5V, but if you use 12V Neopixels you need to provide 12V power here."
- F4: "5V fuse for neopixels." (no rating given)
- J14: "Each pin is rated for 7A continuous. The fuse holder is rated for 10A."
- "The connectors J10, J11, J12 and J14 are JST connectors VH style." (many strips ship with JST SM plugs, so an adapter is needed)
- "The red D25 LED can be used to confirm you have a good fuse and are providing power for neopixels."
- Example config:
type: grb, "Most WS2812-based LEDs are grb color order."
- "Regular" vs "NoGlow" firmware: Regular makes a strip glow blue once powered and booted, before MPF runs.
Not stated on the page: refresh rate, level shifting of the data line, the F4 fuse rating.